Big water tank floor stand movable evaporative desert cooling fan
220V ~ 240V AC powered floor standing portable evaporative air conditioner with CE , CB , CCC , ISO ,etc. made by China manufacturer for outdoor event use
Nature's most efficient means of cooling is through the evaporation of water. Evaporative cooling works on the principle of heat absorption by moisture evaporation. It also happens on human skin, the body sweat to cool temperature down.
|Fan||Single unit cover area||50-70m2|
|Loading quantity (assembled) in 40HQ||132pcs|
|Over load protection||Yes|
|Water inlet||Manual & Auto|
1. Low carbon green product, environmentally friendly, no CFC'S, no damage to the Ozone layer
2. Super energy-saving, only cost 1/10 electricity than air con
3. Less than 1/2 the price of air conditioning
4. Water proof motor, Water pump protection function against low water level
5. Low purchasing cost, Low power consumption, Low installation cost, Low maintenance cost
6. Aluminum material cabinet motor, 100% copper wire
7. Long lifetime water pump
8. Unique designed float valve, available water pressure from 0 bar to 5.5bar
9. Auto swing, remote control, auto timing off
You could find our products by below keywords:
air cooling fan
room air cooler
honey pad cooler
big size air cooler
air cooler portable
mobile air cooler
noiseless air cooler
metal body air cooler
evaporative air cooler
air cooler body plastic
commercial air cooler
energy saving air cooler
floor standing air cooler
water cooler air conditioner
Q: What advantages does evaporative cooling have compared to refrigerated cooling systems?
A: Evaporative cooling will provide substantial energy savings over refrigerated air units. The simplicity of the design allows low maintenance requirements. The evaporative cooler will provide fresh, filtered air. The outside air that has been cooled will blow the stale inside air out. With the substantial savings on energy and the air constantly changing, the industrial / commercial evaporative cooler is ideally suited for area cooling or spot cooling in factories, laundries, churches, schools, agri-businesses, restaurants and many other applications.
Q: How much water do I put in?
The amount of water required will vary depending on the size of the unit you own. To help determine the correct level, each evaporative cooler is equipped with a water level indicator. It can be found on bottom sump of the unit. Add water until the indicator shoes that the water reservoir is filled. Water will leak from the unit if it is overfilled.
Q: At start-up, the air has a slight odor?
Occasionally an evaporative cooler may give off a slight odor when first put into use. To eliminate this odor, run the unit for an hour, drain all the water from the tank and add fresh water. If odor persists repeat the above procedure until it is eliminated.
Q: How often do I have to fill the mobile unit?
The length of time will vary depending on the dryness of the air and the speed at which the cooler is running. Typically water supplied should last from for one day, or half day, because we design the tank for 8 hours use or 4 hours consumption.
If you want to know more about the product, you are welcome to inquire!
Contacts: Nelson +86-18659185822